In this Makita 2704 table saw review, I will discuss the blade guard, the dust collection system, the Miter gauge, and the price. I hope you will find this information helpful! There are many table saws to choose from. So, make sure you read the entire review before making a purchase. We’ll go over each of the features in detail so you can make an informed decision. And don’t forget to check out our video review, which shows how to buy a Makita saw.
Makita 2704 table saw blade guard
The Makita 2704 table saw comes with several features to protect the operator and the workpiece. One of these features is the flesh sensing technology, or “sawstop.” Woodworking machinery expert Les Winter says, “The blade may come into contact with your flesh and the kickback can hurl the workpiece toward you or draw your hand into the blade.” The blade could also strike embedded teeth or nails. The tip of the blade could also eject at high speed, which could cause serious injury.”
To prevent any damage to your body, always remember to use a protective mat beneath the saw and protect your eyes. The mat should be securely fastened to the floor. Always make sure that the guard is installed before you begin using it. Remember, you never know when it could come off or be damaged, so be cautious! You can also wear safety glasses while using the saw. Whether you’re making cuts with a Makita table saw, you should always remember that a blade guard is crucial.
Miter gauge
When you need to cut wood, the Miter gauge on the Makita 2704 table saw will come in handy. You can use it to measure the length of wood. Moreover, you can easily adjust it for the perfect cut every time. To use the Miter gauge, you must first unplug the saw. Then, adjust the miter gauge’s settings to fit the angle of the blade.
The miter gauge comes with positive stops that make it easier to set the saw’s angle quickly. Depending on your preferences, the gauge will include two-inch positive stops that will allow you to quickly set the miter angle. In addition to these positive stops, the miter gauge will come with three other useful angles: 45 degrees, 90 degrees, and 22 1/2 degrees. However, if you only plan to cut the angle of a board, this feature will not be of much help.
Dust collection system
The dust collection system on the Makita 2704 table saw works by diverting the debris and dust produced by the blade toward a dust port. The dust port is located on the back of the saw and is equipped with a deflection system that directs dust and debris away from the saw blade. The dust port also has a removable cover. The dust deflector is a contiguous part that extends from the dust inlet to the dust outlet.
A good way to improve the dust collection system on the Makita 2704 table saw is to seal off the blade shroud. The current design has too much open space, and lacks air velocity. In order to prevent this, a flexible airtight material can be placed between the blade shroud and table. A shower curtain is a good option for this purpose, as well as duct tape. The only opening in the shroud should be the connection point for the dust collector.
Price
While the Makita 2704 table saw does not come cheap, the features it has make it a good value for money. It is designed to cut rough lumber with loose angles. It has an adjustable fence, easy scales, and a durable guide rail clamp. It also comes with a TCT blade and a bevel guide rule. There are some minor differences between the EU and non-EU versions.
The high-quality motor power of the Makita 2704 table saw ensures accurate cuts. The rip fence glides along a telescopic guide rail and is able to rip up an 8ft x 4-ft sheet. This saw also comes with a brake and electronic soft-start. It also has a large cutting area and easy-to-use scales. Although the 2704 is more expensive than the Makita 2705, it is worth considering if your budget is tight.
Value for money
If you are looking for a table saw, you’ll be happy to find that you can get a lot for your money with the Makita 2704 tablesaw. This model features a powerful 15Amp motor, a 10-inch blade, and 4800-rpm cutting speed. It also comes with an adjustable table and a large cutting area. The table is extendable, and the weight is about 61 pounds. In addition, the saw comes with wrenches and a cutting board.
This Makita table saw has a powerful four-hundred-milliamp motor and an anti-restart button, and it comes with a dewalt stand to hold it in place. It’s built to last, and it’s as durable as any portable model. It also comes with a 30-day, no questions-asked warranty. Overall, this Makita table saw is a great choice for DIY enthusiasts, carpenters, re-modelers, and homeowners who need a powerful tablesaw for the job.
